Energy efficient
The dehumidification process recovers 80% of the latent heat in the hot and humid air. Compared with the traditional ventilation and dehumidification, the average cost is 40%-60%.
Dry and wet partition layout, eliminate chlorine corrosion
The refrigerant compression system components are separated from the air duct system to prevent corrosion of the heat pump equipment by chlorine-containing air.
New air treatment technology for plasma sterilization and AOT removal of DBPs (optional)
Photocatalytic advanced oxidation AOT technology is used to remove DBPs and other volatile organic compounds (VOCs), such as ammonia nitrogen in indoor air, to eliminate air pollution and asthma in swimming pools.
A multi-functional, new experience to meet the needs of the four seasons
1 Weilang Shi dehumidification heat pump covers five functions of constant temperature, constant humidity, water heating, heat energy recovery and fresh air treatment, and comprehensively creates a high quality air environment.
Separation of water and electricity, safe and reliable
Separation of water and electricity is safe and safe, and there are no safety hazards such as electric shock, flammability, explosiveness and poisoning.
Stable and reliable performance
Equipped with a high-quality brand scroll compressor, the operation is stable and the failure rate is low. Key components such as thermal expansion valves and electronic appliances are well-known brand components.
Green
Adopt environmentally friendly R-407C or R410A refrigerant-free fluorine system to save energy and reduce pollution.
Intelligent control and management convenience
Adopting precise and reliable automatic teletype control system, the touch-screening true color LCD display is easy to operate and can be connected to the building for remote control via the Internet.
Module structure, beautiful appearance
The panel is made of GI galvanized steel with embedded polyurethane (PU) fireproof and thermal insulation material; the frame is made of anti-cold bridge aluminum alloy, and the module structure is also convenient for disassembly and maintenance.
Multiple system protection
Pressure protection: high pressure and high protection, low pressure and low protection, water flow protection;
Temperature protection: Exhaust gas temperature is too far away from protection. Compressor is protected from temperature and hot water is too high.
Power protection: lack/reverse phase protection, compressor overload protection.
The equipment test condition is 29 degrees Celsius, the relative humidity is 60%-70%, the pool water temperature is 27 degrees Celsius; the pool water condenser inlet water temperature is 27 degrees Celsius, and the outlet water temperature is 29 degrees Celsius;
For the lack of cold and heat, the design of the table cooler can be used to assist the refrigeration and heating equipment according to the calculation;
The residual pressure outside the machine can be adjusted as needed;
The outdoor condenser can be set as a water-cooled condenser according to the requirements of the user;
The structure of the unit can be made into a component structure according to the requirements of the user;
Product improvement data is subject to change without notice.
LAS15-D-LAS100-D double fan series dehumidification heat pump specification size chart
LAS120-D-LAS180-DDual fan series dehumidification heat pump specification size chart
Dual fan series dehumidification heat installation technical parameters
The above dimensions are based on the final floor plan.
